MoS2 Filled PTFE

MoS2 PTFE Bushings | Bearing
Slider | Piston Up Seals

Content:	5%-15%
Types:	Round \| Square \| Rectangle
Custom:	As Drawing
Application:	Bearings \| Bushings \| Slide

More Info

Teflex PTFE MoS2 Seal & Gasket Are Made Of 5% -15% MoS2 (Molybdenum Disulfide) Filled PTFE. PTFE Filled MoS2 Material Increases Hardness, Stiffness & Wear To Use In High-Speed & Temperature Application. As Well As This Material With Excellent Chemical Resistance, Low Cold Flow & Coefficient Of Friction etc. Also Teflex Can Supply PTFE Glass MoS2, PTFE MoS2 Graphite & PTFE Bronze MoS2 Filled Materials Etc.

Advantages

Good Thermal Conductivity & Wear
Excellent Sliding & Chemical Resistance
Low Cold Flow & Coefficient of Friction
Electrically Non-Conductive Material

Properties

Tube | Sheet | Gasket | Rod
Density：2.2±0.1g/cm³
Color: Black
Gasket Types: Full Face & RF Gasket
Material: PTFE Filled MoS2
Min. Temperature: -260°C
Max. Temperature: 260°C
Tensile Strength: ≥20 Mpa
Ultimate Elongation: ≥ 300%

Applications

Medium Concentrations of Acids
Hydrocarbons | Solvents | Water | Seats
Cryogenics Material | Hydrogen Peroxide
Slide Covers | Bearings | Refrigerants
Dynamic Seals | Piston Cup Seals
Bushings | Glide Rings | Back-up Rings

Teflex Team Supply Custom Made of MoS2 PTFE As Drawing too.

PTFE Filled MoS2 Sheet Inquiry:

Size	Thickness	Qty/Pcs
1500 x 1500mm	0.5mm	5
60" x 60"	1/64"	10
1500 x 1500mm	1.5mm	15
60" x 60"	1/16"	15
1500 x 1500mm	3.0mm	20
60" x 60"	1/8"	20
1500 x 1500mm	6.0mm	30
60" x 60"	1/4"	35