Polyimide Filled PTFE
Polyimide PTFE Bushings | Dry Running | Stop-Start Applications
| Content: | 5%-15% |
|---|---|
| Types: | Round | Square | Rectangle |
| Custom: | As Drawing |
| Application: | Bearings | Bushings | Slide |
Teflex PTFE Polyimide Seal & Gasket Are Made Of 5% -15% PI (Polyimide) Filled PTFE. PTFE Filled Polyimide Materials Is Broad Temperature Range & Chemical Compatibility. As Well As This Material With Radiation Resistant, Low Cold Flow & Superior Coefficient Of Friction etc.
Advantages
-
Good Thermal Conductivity & Wear
-
Superior Wear & Coefficient of Friction
-
Excellent Sliding & Electrical Insulation
-
Resist Chemical & Machining Properties
-
Softer Mating Surfaces Steel | Aluminum
-
Low Cold Flow & Wide Temperature Range
Properties
-
Color: Yellow
-
Density: 1.9±0.5g/cm³
-
Tensile Strength: ≥15 Mpa
-
Ultimate Elongation: ≥ 200%
-
Temperature: -260°C to +260°C
-
Gasket Types: FF | RF | Custom Gasket
Applications
-
Automotive & Textile industry
-
Rotary & Reciprocating Seals
-
Lip Seals | Bearings | Valve Seat
-
Food & Medical Industry Processing
-
Mechanical & Precision Engineering
-
Bushings | Piston Rings | Chain Guides
-
Stop-start | Sockets | Constructive Parts
PTFE Filled Polyimide Sheet Inquiry
| Size | Thickness | Qty/Pcs |
| 1500 x 1500mm | 0.5mm | 5 |
| 60" x 60" | 1/64" | 10 |
| 1500 x 1500mm | 1.5mm | 15 |
| 60" x 60" | 1/16" | 15 |
| 1500 x 1500mm | 3.0mm | 20 |
| 60" x 60" | 1/8" | 20 |
| 1500 x 1500mm | 6.0mm | 30 |
| 60" x 60" | 1/4" | 35 |
Polyimide-Filled PTFE Gasket
-
pH:0-14
-
Color: Yellow
-
PTFE Polyimide
-
Type: RF | FF | Custom Gasket
-
Thickness 0.8 | 1.5 | 3.0 | 6.0mm
-
Standard: ASME B16.21 | DIN | JIS
-
Shape: Round | Square | Rectangular
-
Customs: Die Cut Gasket As Drawing
PTFE Filled Polyimide Inquiry
| Size | Class | Qty |
| 2" | 150# | 50 |
| 4" | 300# | 100 |
| 6" | 600# | 150 |
| 8" | 900# | 50 |
| 10" | 1500# | 100 |
| 12" | 2500# | 50 |
Teflex Available supply PTFE Filled Polyimide Seal | Rod | Tube Etc. and Custom Gasket As Your Drawing.
